How to Refinish Your Wood Floor
Hardwood floor refinishing can be a great investment. Even if you’re on a budget, refinishing hardwood floors adds value to any home. But refinishing takes time, effort, and a bit of craftsmanship.
Sanding – Although hardwood floors are durable and relatively easy to work with, they still need sanding from time to time. Sanding makes the surfaces smooth, reduces the number of scratches, and allows for a variety of different finishes. Professionally sanded floors will bring new life to a boring room such as a kitchen or a bedroom, but a poor-tacked, sloppy sanding can lead to damage that will cost you much more than time and money.
Softening – It’s a good idea to soften your refinishing efforts before you start. Start by using a small vacuum pump to remove any loose dirt and dust. Next, use a wet/dry shop vac to pick up and suck up the dust and dirt. Next, spray a light coat of latex primer onto the floor. Use a tack cloth to buff the floors until the color has completely dried. A final buff with a dry, tacky cloth will seal your hardwood floor with an extra layer of protection and give you the chance to use a vacuum cleaner and polish once you’re finished.
Finish – Many people who want to do their own hardwood floor refinishing find themselves intimidated by the process. While a do-it-yourself approach is possible, professional hardwood floor refinishing service is generally a better idea if you have questions or need more assistance. Professional refinishing experts typically have the proper equipment and know-how to finish your wood floors without causing excessive damage. A few stops over home improvement stores offer basic do-it-yourself training but it’s generally best to get the advice of a professional who can guide you from beginning to end.
Polishing – Once you’ve successfully finished your refinishing project, another concern is figuring out what you can do to prevent future scratches and dulling. To achieve an even look, you should always wax your wood floors after finishing hardwood floor refinishing. This helps prevent dulling caused by water or other liquids sitting on your wood floors. You should also wipe down all wooden surfaces at least once a week with a fine-grit polishing paste.
Some homeowners opt for DIY hardwood floor refinishing, but this is a process best left to the flooring professionals. Although you can strip your floor bare and then apply a coat of polyurethane or varnish, this process can be very messy. Instead, you should take a more measured approach and use a solid degreasing agent that will seal the pores of the wood. Once the coat has been applied and allowed to sit, then you can apply the polyurethane. Like any coating, however, this must be allowed to dry before it is added to the surface of your hardwood floor.